
Cisco Systems 48x 10/100/1000 Ethernet PoE+ and 370W PoE budget Ports, 4x 1G SFP uplinks
Description
Cisco Systems 48x 10/100/1000 Ethernet PoE+ and 370W PoE budget Ports, 4x 1G SFP uplinks
Specifications
Cisco Catalyst 2960X-48FPD-L Specifications:
- General:
- Model: Cisco Catalyst 2960X-48FPD-L
- Ports:
- 48 x 10/100/1000 Ethernet ports (Gigabit Ethernet)
- 4 x 1G SFP (Small Form-factor Pluggable) uplink ports
- PoE+ (Power over Ethernet Plus): Yes, 48 PoE+ ports (supports IEEE 802.3at)
- Form Factor: Rack-mountable (1RU)
- Weight: Approximately 9.5 lbs (4.3 kg)
- Dimensions: 17.5" x 10.6" x 1.75" (44.5 cm x 27 cm x 4.4 cm)
- Power Supply: Internal (AC input)
- Power and PoE:
- PoE Power Budget: 370W (depending on the number of active PoE+ ports and power requirements)
- PoE+ Standards: IEEE 802.3at (supports higher power levels for devices such as IP phones, cameras, and wireless access points)
- Power Delivery: Automatically negotiates power between the switch and connected devices
- Per-Port PoE Management: Configurable power allocation on a per-port basis, power priority, and power classification
- PoE Scheduling: Allows for scheduling of power on/off for individual ports
- Performance:
- Switching Capacity: 176 Gbps
- Forwarding Rate: 130.95 million packets per second (mpps)
- MAC Address Table Size: 16,000 entries
- Jumbo Frame Support: Up to 9,216 bytes
- Layer 2 Features:
- VLAN Support: Up to 4,094 VLANs
- VLAN Trunking: IEEE 802.1Q (supports VLAN tagging)
- Spanning Tree Protocol (STP): IEEE 802.1D (Classic STP), IEEE 802.1w (Rapid STP), IEEE 802.1s (Multiple STP)
- Link Aggregation: IEEE 802.3ad (LACP - Link Aggregation Control Protocol)
- Port Security: Yes, with MAC address limiting
- IGMP Snooping: Yes, for multicast traffic
- Quality of Service (QoS): 8 egress queues for traffic prioritization
- Port Mirroring: Yes, for traffic monitoring
- Management:
- Management Interface:
- Web-based GUI (Cisco Network Assistant)
- CLI (Command-Line Interface)
- SNMP (Simple Network Management Protocol)
- Protocols Supported:
- SNMP v1/v2c/v3
- RMON (Remote Monitoring)
- TFTP (Trivial File Transfer Protocol) for software upgrades
- DHCP (Dynamic Host Configuration Protocol) for network configuration
- Stacking Support: Cisco FlexStack (for stacking multiple switches for improved management and redundancy)
- Security Features:
- IEEE 802.1X (Port-based Authentication)
- ACLs (Access Control Lists)
- Secure Shell (SSH) for encrypted remote access
- Environmental:
- Operating Temperature: 32°F to 113°F (0°C to 45°C)
- Storage Temperature: -40°F to 158°F (-40°C to 70°C)
- Operating Humidity: 10% to 85% non-condensing
- Storage Humidity: 5% to 90% non-condensing
- Certifications: CE, UL, RoHS compliant, ENERGY STAR